Plumbing Tips

Leaks are often the culprit for unexplained increased consumption, and toilet leaks are the most common. A toilet can waste thousands of gallons of water in a single billing period. Repairing a toilet leak is usually easy and relatively inexpensive to repair.

To check for a leak, remove the top of the tank behind the bowl and put 3-4 drops of food coloring in the tank water. Don't flush the toilet for an hour or more if possible. Check the water in the toilet bowl, and if the bowl water has been colored with the food coloring, then you have a leak. This type of leak is usually easy to repair by replacing the flapper assembly. if this does not work, consult a plumber.

Another leak that is common is a "leaky"faucet whether it is inside your home or at an outside faucet.

In order to determine if you have a water leak, read your water meter. Write the reading down and go back and re-read meter approximately 15-20 minutes later and see if any of the numbers on the meter have moved. There is also a leak indicater on most meters which is located in the center of the meters. If leak indicator is moving and no water is being used, there is a leak somewhere. If there is a cut-off valve at the house, cut water off at cut-off and go back to see if meter is still moving. If so, the leak is in your water line. If not, the leak is probably somewhere in your house.


Water costs money...don't waste it!
A dripping faucet or fixture can waste 3 gallons a day...
a total of 1095 gallons a year.
Conserve water and save money!

Water per quarter at 60 psi water pressure

Diameter of streamGallonsCubic FeetCubic Meters
figure 11/4"1,181,500158,0004,475
figure 23/16"666,00089,0312,521
figure 31/8"296,00039,4001,115
figure 41/16"74,0009,850280

Conservation Tips

Learn about how you can save money and the environment by conserving water.

Read More

Plumbing Tips

Need to fix a leak? Here are some inexpensive repair tips to keep your water secure.

Read More